Different engine selection diesel powered forklift 3500kg with low
Max. lifting height: 3000-6000mm
Tyres type: Pneumatic/solid
Tilt of mast/fork carriage forward/backward: 6°-12°
Fork dimensions: 50/130/1070mm
Wide view mast with best visibility. Engine cover with gas-filled
sound absorbing material.
Cab design by SIP point, conforms to EN-ISO 5353, ensures
compartment with great comfortable and fatigue-free operating.
Leak-free O-rings imported from Japan NOK face seal fittings reduce
Drive axle and steering axle, transmission are with TCM technology,
float type structure achieve a flexible connection between engine
and frame, reduce vibrations greatly. JAPAN SHIMADSU type hydraulic
pump with low noise.
The cylinder have dual safety system - with lowering safety valve
and lowering limited valve.
Advanced multifunction LCD/digital display provides fast and
accurate Monitoring truck status.
The cylinder offers new design by dual safety system - with
lowering safety valve and lowering limited valve.
The electric F/R lever with neutral safety start system.
An intelligent sensor and buffer monitoring system: with safety
check valve to absorb the mast drop speed automatically to avoid
crashing floor and damaging goods.
Remark: The data is based on the lifting height 3000mm; Lifting height
from 3000mm to 6000mm are available.
|Load center distance||mm||500|
|Load distance, centre of drive axle to fork||mm||485|
|Axle loading, laden front/rear||kg||7002/955|
|Axle loading, unladen front/rear||kg||1783/2674|
|Tyre size, front||mm||710*220/695*218|
|Tyre size, rear||mm||590*175/577*162|
|Tilt of mast/fork carriage forward/backward||Grad||6°-12°|
|Height, mast lowered||mm||2060-3139|
|Max. lifting height||mm||3000-6000|
|Height, mast extended||mm||4250-7250|
|Height of overhead guard(cabin)||mm||2105|
|Seat height/stand height||mm||1064|
|Length to face of forks||mm||2790|
|Fork carriage width||mm||1200|
|Ground clearance, laden, below mast||mm||135|
|Ground clearance, centre of wheelbase||mm||150|
|Aisle width for pallets 1000*1200 crossways||mm||4000|
|Aisle width for pallets 800*1200 lengthways||mm||3800|
|Travel speed, laden/unladen||km/h||0-20|
|Lift speed, laden/unladen||mm/s||400|
|Lowering speed, laden/unladen||mm/s||＜600|
|Max. drawbar pull, laden/unladen||N||21600|
|Max. gradeability, laden/unladen||%||20/27|
|Acceleration time, laden/unladen||s||3/4|
|Type of drive control||mechanical/hydraulic|
|Operating pressure for attachments||Mpa||16.5|
|Sound level at the driver's ear acc. to DIN 12053||dB(A)||＜82|